27-day variation in solar-terrestrial parameters: Global characteristics and an origin based approach of the signals

The Earth and the near interplanetary medium are affected by the Sun in different ways. Those processes generated in the Sun that induce perturbations into the Magnetosphere-Ionosphere system are called geoeffective processes and show a wide range of temporal variations, like the 11-year solar cycle (long term variations), the variation of ～27?days (recurrent variations), solar storms enduring for some days, particle acceleration events lasting for some hours, etc.In this article, the periodicity of ～27?days associated with the solar synodic rotation period is investigated. The work is mainly focused on studying the resulting 27-day periodic signal in the magnetic activity, by the analysis of the horizontal component of the magnetic field registered on a set of 103 magnetic observatories distributed around the world. For this a new method to isolate the periodicity of interest has been developed consisting of two main steps: the first one consists of removing the linear trend corresponding to every calendar year from the data series, and the second one of removing from the resulting series a smoothed version of it obtained by applying a 30-day moving average. The result at the end of this process is a data series in which all the signal with periods larger than 30?days are canceled.The most important characteristics observed in the resulting signals are two main amplitude modulations: the first and most prominent related to the 11-year solar cycle and the second one with a semiannual pattern. In addition, the amplitude of the signal shows a dependence on the geomagnetic latitude of the observatory with a significant discontinuity at approx. ±60°.The processing scheme was also applied to other parameters that are widely used to characterize the energy transfer from the Sun to the Earth: F10.7 and Mg II indices and the ionospheric vertical total electron content (vTEC) were considered for radiative interactions; and the solar wind velocity for the non-radiative interactions between the solar wind and the magnetosphere. The 27-day signal obtained in the magnetic activity was compared with the signals found in the other parameters resulting in a series of cross-correlations curves with maximum correlation between 3 and 5?days of delays for the radiative and between 0 and 1?days of delay for the non-radiative parameters. This result supports the idea that the physical process responsible for the 27-day signal in the magnetic activity is related to the solar wind and not to the solar electromagnetic radiation.     

考虑辐射的化学平衡流驻点线解

本文用数值方法求解了化学平衡的高超声速粘性激波层驻点线流场。考虑了辐射和质量引射对流场的影响。辐射模型采用线和连续谱模型。文中讨论了引射率、头部半径、来流速度对壁面传热的影响。与有关文献结果比较表明,本文的方法是可行的。     

普郎克定律的一个新推论

根据热辐射基本定律———普郎克定律,推导出了一个新的推论。即对于任意温度T的黑体辐射源,总存在一对应波长λδ,该波长对应的黑体单色辐射亮度对温度T的偏导数最大,且λδT =2 4 10 .3μm·K。这一结论对于单波长辐射温度计设计中探测器波段的选择有重要参考价值,根据此结论可以推出温度测量灵敏度最高的波长。     

Stellar infrared astronomy with EDISON

In this review the IR emission from circumstellar material is discussed, both of ionized gas and dust grains, and the astrophysical information that can be extracted from such observations. Some emphasis is placed on the possibilities of stellar IR astronomy using a large space-borne telescope, especially with respect to the much better spatial and spectral resolution of such a telescope compared to the current generation of ground-based and space IR telescopes.     

强辐射条件下应变测量的抗干扰技术研究

文章从动力学结构分析应变测量的基本原理入手,着重介绍了国防高科技试验中,在强辐射、强电磁脉冲干扰环境条件下,为保证应变测量的实现,经模拟试验研究,在应变测量时采用了一系列抗干扰技术措施,包括特殊环境条件下所用元器件材料的选择,传感应变计安装方式,组桥接线方式,密封屏蔽等技术。并介绍了这些技术措施在某试验现场应变测试试验中的应用概况.     

基于蒙特卡罗法辐射传递系数的统计分析

文章基于蒙特卡罗方法定义了表面热辐射换热辐射传递系数的表达式,确定其概率分布和置信度水平并进行统计分析。推导封闭腔内辐射传递系数的相对和绝对误差公式,为求解辐射传递系数所需追踪射线数量提供参考依据。     

弹道靶红外辐射测量

为深入认识再入物理现象 ,在弹道靶上做了模型头部和近尾流红外辐射测量。发射器为 1 4.5mm口径的二级轻气炮 ,模型为1 0mm的球 ,材料为聚碳酸酯和铝 ,模型发射速度 4～6km/s,使用红外InSb探测器测量波长 3～ 5 .4μm的红外辐射 ,靶室压力 5 .32kPa。实验中使用光电法测量模型速度 ,两站阴影照相进行模型姿态监测和速度核实。实验结果表明 :球模型的红外辐射强度强烈依赖于模型材料和模型飞行速度。对不同材料模型头部和尾流部辐射强度的定性比较说明由于低温材料烧蚀产物的存在 ,极大地增强了头部和近尾流区的辐射强度 ,而且延长了尾流辐射长度     

浮动壁火焰筒壁温试验和计算分析

对某浮动壁火焰筒的壁温进行了试验和计算分析。该火焰筒应用了新型的浮动壁结构和高效的冲击/发散复合冷却技术。壁温分布试验在全环形燃烧室试验台上进行,采用热电偶和示温漆测量。计算采用了稳态导热问题的有限元求解方法。研究分析表明,火焰筒壁温在材料的长期许用温度范围内,壁温计算反映了火焰筒壁温的分布规律和趋势。冲击/发散复合冷却方式的轴向壁温梯度小于缝槽气膜冷却方式,对降低热应力水平,延长火焰筒使用寿命有利。     

靶机红外目标模拟装置的研究

通过对一种靶机红外目标模拟装置的研究，介绍了这种装置的设计特点、参数选择和试验结果。该装置以固体燃料作为燃烧剂，其红外辐射强度主要决定于燃料的组分、工作温度、辐射体的材料以及辐射体的面积，而工作温度的选取是设计的关键。文中提出一种实用而简便的综合分析方法，根据装置所需要的红外辐射强度来预计其工作温度与结构尺寸，据此设计的装置实物经红外辐射特性测定后证明能满足预定指标要求。本文陈述的这种方法已被用于某靶机红外目标模拟装置的设计，并取得实际应用成果，对同类装置的设计和研究可资借鉴     

反辐射导弹设计技术

反辐射导弹（ＡＲＭ）是一种利用雷达辐射源的电磁波，发现、跟踪并摧毁雷达系统的导弹。反辐射导弹的出现，使仅有“软”杀伤能力的电子战有了“硬”摧毁能力。论述了反辐射导弹的特点及其局限性，讨论了提高反辐射导弹性能的技术方法。这些技术包括：缩窄工作频带、采用比相比幅单脉冲侧向体制、数字化和集成化设计等。